name
|
value
|
description
|
hadoop.hdfs.configuration.version
|
1
|
version of this configuration file
|
dfs.namenode.rpc-address
|
RPC address that handles all clients requests. In the case of HA/Federation where multiple namenodes exist, the name service id is added to the name e.g. dfs.namenode.rpc-address.ns1 dfs.namenode.rpc-address.EXAMPLENAMESERVICE The value of this property will take the form of nn-host1:rpc-port.
| |
dfs.namenode.rpc-bind-host
|
The actual address the RPC server will bind to. If this optional address is set, it overrides only the hostname portion of dfs.namenode.rpc-address. It can also be specified per name node or name service for HA/Federation. This is useful for making the name node listen on all interfaces by setting it to 0.0.0.0.
| |
dfs.namenode.servicerpc-address
|
RPC address for HDFS Services communication. BackupNode, Datanodes and all other services should be connecting to this address if it is configured. In the case of HA/Federation where multiple namenodes exist, the name service id is added to the name e.g. dfs.namenode.servicerpc-address.ns1 dfs.namenode.rpc-address.EXAMPLENAMESERVICE The value of this property will take the form of nn-host1:rpc-port. If the value of this property is unset the value of dfs.namenode.rpc-address will be used as the default.
| |
dfs.namenode.servicerpc-bind-host
|
The actual address the service RPC server will bind to. If this optional address is set, it overrides only the hostname portion of dfs.namenode.servicerpc-address. It can also be specified per name node or name service for HA/Federation. This is useful for making the name node listen on all interfaces by setting it to 0.0.0.0.
| |
dfs.namenode.lifeline.rpc-address
|
NameNode RPC lifeline address. This is an optional separate RPC address that can be used to isolate health checks and liveness to protect against resource exhaustion in the main RPC handler pool. In the case of HA/Federation where multiple NameNodes exist, the name service ID is added to the name e.g. dfs.namenode.lifeline.rpc-address.ns1. The value of this property will take the form of nn-host1:rpc-port. If this property is not defined, then the NameNode will not start a lifeline RPC server. By default, the property is not defined.
| |
dfs.namenode.lifeline.rpc-bind-host
|
The actual address the lifeline RPC server will bind to. If this optional address is set, it overrides only the hostname portion of dfs.namenode.lifeline.rpc-address. It can also be specified per name node or name service for HA/Federation. This is useful for making the name node listen on all interfaces by setting it to 0.0.0.0.
| |
dfs.namenode.secondary.http-address
|
0.0.0.0:50090
|
The secondary namenode http server address and port.
|
dfs.namenode.secondary.https-address
|
0.0.0.0:50091
|
The secondary namenode HTTPS server address and port.
|
dfs.datanode.address
|
0.0.0.0:50010
|
The datanode server address and port for data transfer.
|
dfs.datanode.http.address
|
0.0.0.0:50075
|
The datanode http server address and port.
|
dfs.datanode.ipc.address
|
0.0.0.0:50020
|
The datanode ipc server address and port.
|
dfs.datanode.http.internal-proxy.port
|
0
|
The datanode's internal web proxy port. By default it selects a random port available in runtime.
|
dfs.datanode.handler.count
|
10
|
The number of server threads for the datanode.
|
dfs.namenode.http-address
|
0.0.0.0:50070
|
The address and the base port where the dfs namenode web ui will listen on.
|
dfs.namenode.http-bind-host
|
The actual adress the HTTP server will bind to. If this optional address is set, it overrides only the hostname portion of dfs.namenode.http-address. It can also be specified per name node or name service for HA/Federation. This is useful for making the name node HTTP server listen on all interfaces by setting it to 0.0.0.0.
| |
dfs.namenode.heartbeat.recheck-interval
|
300000
|
This time decides the interval to check for expired datanodes. With this value and dfs.heartbeat.interval, the interval of deciding the datanode is stale or not is also calculated. The unit of this configuration is millisecond.
|
dfs.http.policy
|
HTTP_ONLY
|
Decide if HTTPS(SSL) is supported on HDFS This configures the HTTP endpoint for HDFS daemons: The following values are supported: - HTTP_ONLY : Service is provided only on http - HTTPS_ONLY : Service is provided only on https - HTTP_AND_HTTPS : Service is provided both on http and https
|
dfs.client.https.need-auth
|
false
|
Whether SSL client certificate authentication is required
|
dfs.client.cached.conn.retry
|
3
|
The number of times the HDFS client will pull a socket from the cache. Once this number is exceeded, the client will try to create a new socket.
|
dfs.https.server.keystore.resource
|
ssl-server.xml
|
Resource file from which ssl server keystore information will be extracted
|
dfs.client.https.keystore.resource
|
ssl-client.xml
|
Resource file from which ssl client keystore information will be extracted
|
dfs.datanode.https.address
|
0.0.0.0:50475
|
The datanode secure http server address and port.
|
dfs.namenode.https-address
|
0.0.0.0:50470
|
The namenode secure http server address and port.
|
dfs.namenode.https-bind-host
|
The actual adress the HTTPS server will bind to. If this optional address is set, it overrides only the hostname portion of dfs.namenode.https-address. It can also be specified per name node or name service for HA/Federation. This is useful for making the name node HTTPS server listen on all interfaces by setting it to 0.0.0.0.
| |
dfs.datanode.dns.interface
|
default
|
The name of the Network Interface from which a data node should report its IP address. e.g. eth2. This setting may be required for some multi-homed nodes where the DataNodes are assigned multiple hostnames and it is desirable for the DataNodes to use a non-default hostname. Prefer using hadoop.security.dns.interface over dfs.datanode.dns.interface.
|
dfs.datanode.dns.nameserver
|
default
|
The host name or IP address of the name server (DNS) which a DataNode should use to determine its own host name. Prefer using hadoop.security.dns.nameserver over dfs.datanode.dns.nameserver.
|
dfs.namenode.backup.address
|
0.0.0.0:50100
|
The backup node server address and port. If the port is 0 then the server will start on a free port.
|
dfs.namenode.backup.http-address
|
0.0.0.0:50105
|
The backup node http server address and port. If the port is 0 then the server will start on a free port.
|
dfs.namenode.replication.considerLoad
|
true
|
Decide if chooseTarget considers the target's load or not
|
dfs.namenode.replication.considerLoad.factor
|
2.0
|
The factor by which a node's load can exceed the average before being rejected for writes, only if considerLoad is true.
|
dfs.default.chunk.view.size
|
32768
|
The number of bytes to view for a file on the browser.
|
dfs.datanode.du.reserved.calculator
|
org.apache.hadoop.hdfs.server.datanode.fsdataset.impl.ReservedSpaceCalculator$ReservedSpaceCalculatorAbsolute
|
Determines the class of ReservedSpaceCalculator to be used for calculating disk space reservedfor non-HDFS data. The default calculator is ReservedSpaceCalculatorAbsolute which will use dfs.datanode.du.reserved for a static reserved number of bytes. ReservedSpaceCalculatorPercentage will use dfs.datanode.du.reserved.pct to calculate the reserved number of bytes based on the size of the storage. ReservedSpaceCalculatorConservative and ReservedSpaceCalculatorAggressive will use their combination, Conservative will use maximum, Aggressive minimum. For more details see ReservedSpaceCalculator.
|
dfs.datanode.du.reserved
|
0
|
Reserved space in bytes per volume. Always leave this much space free for non dfs use. Specific storage type based reservation is also supported. The property can be followed with corresponding storage types ([ssd]/[disk]/[archive]/[ram_disk]) for cluster with heterogeneous storage. For example, reserved space for RAM_DISK storage can be configured using property 'dfs.datanode.du.reserved.ram_disk'. If specific storage type reservation is not configured then dfs.datanode.du.reserved will be used.
|
dfs.datanode.du.reserved.pct
|
0
|
Reserved space in percentage. Read dfs.datanode.du.reserved.calculator to see when this takes effect. The actual number of bytes reserved will be calculated by using the total capacity of the data directory in question. Specific storage type based reservation is also supported. The property can be followed with corresponding storage types ([ssd]/[disk]/[archive]/[ram_disk]) for cluster with heterogeneous storage. For example, reserved percentage space for RAM_DISK storage can be configured using property 'dfs.datanode.du.reserved.pct.ram_disk'. If specific storage type reservation is not configured then dfs.datanode.du.reserved.pct will be used.
|
dfs.namenode.name.dir
|
Determines where on the local filesystem the DFS name node should store the name table(fsimage). If this is a comma-delimited list of directories then the name table is replicated in all of the directories, for redundancy.
| |
dfs.namenode.name.dir.restore
|
false
|
Set to true to enable NameNode to attempt recovering a previously failed dfs.namenode.name.dir. When enabled, a recovery of any failed directory is attempted during checkpoint.
|
dfs.namenode.fs-limits.max-component-length
|
255
|
Defines the maximum number of bytes in UTF-8 encoding in each component of a path. A value of 0 will disable the check.
|
dfs.namenode.fs-limits.max-directory-items
|
1048576
|
Defines the maximum number of items that a directory may contain. Cannot set the property to a value less than 1 or more than 6400000.
|
dfs.namenode.fs-limits.min-block-size
|
1048576
|
Minimum block size in bytes, enforced by the Namenode at create time. This prevents the accidental creation of files with tiny block sizes (and thus many blocks), which can degrade performance.
|
dfs.namenode.fs-limits.max-blocks-per-file
|
1048576
|
Maximum number of blocks per file, enforced by the Namenode on write. This prevents the creation of extremely large files which can degrade performance.
|
dfs.namenode.edits.dir
|
${dfs.namenode.name.dir}
|
Determines where on the local filesystem the DFS name node should store the transaction (edits) file. If this is a comma-delimited list of directories then the transaction file is replicated in all of the directories, for redundancy. Default value is same as dfs.namenode.name.dir
|
dfs.namenode.edits.dir.required
|
This should be a subset of dfs.namenode.edits.dir, to ensure that the transaction (edits) file in these places is always up-to-date.
| |
dfs.namenode.shared.edits.dir
|
A directory on shared storage between the multiple namenodes in an HA cluster. This directory will be written by the active and read by the standby in order to keep the namespaces synchronized. This directory does not need to be listed in dfs.namenode.edits.dir above. It should be left empty in a non-HA cluster.
| |
dfs.namenode.edits.journal-plugin.qjournal
|
org.apache.hadoop.hdfs.qjournal.client.QuorumJournalManager
| |
dfs.permissions.enabled
|
true
|
If "true", enable permission checking in HDFS. If "false", permission checking is turned off, but all other behavior is unchanged. Switching from one parameter value to the other does not change the mode, owner or group of files or directories.
|
dfs.permissions.superusergroup
|
supergroup
|
The name of the group of super-users. The value should be a single group name.
|
dfs.cluster.administrators
|
ACL for the admins, this configuration is used to control who can access the default servlets in the namenode, etc. The value should be a comma separated list of users and groups. The user list comes first and is separated by a space followed by the group list, e.g. "user1,user2 group1,group2". Both users and groups are optional, so "user1", " group1", "", "user1 group1", "user1,user2 group1,group2" are all valid (note the leading space in " group1"). '*' grants access to all users and groups, e.g. '*', '* ' and ' *' are all valid.
| |
dfs.namenode.acls.enabled
|
false
|
Set to true to enable support for HDFS ACLs (Access Control Lists). By default, ACLs are disabled. When ACLs are disabled, the NameNode rejects all RPCs related to setting or getting ACLs.
|
dfs.namenode.lazypersist.file.scrub.interval.sec
|
300
|
The NameNode periodically scans the namespace for LazyPersist files with missing blocks and unlinks them from the namespace. This configuration key controls the interval between successive scans. Set it to a negative value to disable this behavior.
|
dfs.block.access.token.enable
|
false
|
If "true", access tokens are used as capabilities for accessing datanodes. If "false", no access tokens are checked on accessing datanodes.
|
dfs.block.access.key.update.interval
|
600
|
Interval in minutes at which namenode updates its access keys.
|
dfs.block.access.token.lifetime
|
600
|
The lifetime of access tokens in minutes.
|
dfs.datanode.data.dir
|
Determines where on the local filesystem an DFS data node should store its blocks. If this is a comma-delimited list of directories, then data will be stored in all named directories, typically on different devices. The directories should be tagged with corresponding storage types ([SSD]/[DISK]/[ARCHIVE]/[RAM_DISK]) for HDFS storage policies. The default storage type will be DISK if the directory does not have a storage type tagged explicitly. Directories that do not exist will be created if local filesystem permission allows.
| |
dfs.datanode.data.dir.perm
|
700
|
Permissions for the directories on on the local filesystem where the DFS data node store its blocks. The permissions can either be octal or symbolic.
|
dfs.replication
|
3
|
Default block replication. The actual number of replications can be specified when the file is created. The default is used if replication is not specified in create time.
|
dfs.replication.max
|
512
|
Maximal block replication.
|
dfs.namenode.replication.min
|
1
|
Minimal block replication.
|
dfs.namenode.maintenance.replication.min
|
1
|
Minimal live block replication in existence of maintenance mode.
|
dfs.namenode.safemode.replication.min
|
a separate minimum replication factor for calculating safe block count. This is an expert level setting. Setting this lower than the dfs.namenode.replication.min is not recommend and/or dangerous for production setups. When it's not set it takes value from dfs.namenode.replication.min
| |
dfs.namenode.max-corrupt-file-blocks-returned
|
100
|
The maximum number of corrupt file blocks listed by NameNode Web UI, JMX and other client request.
|
dfs.blocksize
|
134217728
|
The default block size for new files, in bytes. You can use the following suffix (case insensitive): k(kilo), m(mega), g(giga), t(tera), p(peta), e(exa) to specify the size (such as 128k, 512m, 1g, etc.), Or provide complete size in bytes (such as 134217728 for 128 MB).
|
dfs.client.block.write.retries
|
3
|
The number of retries for writing blocks to the data nodes, before we signal failure to the application.
|
dfs.client.block.write.replace-datanode-on-failure.enable
|
true
|
If there is a datanode/network failure in the write pipeline, DFSClient will try to remove the failed datanode from the pipeline and then continue writing with the remaining datanodes. As a result, the number of datanodes in the pipeline is decreased. The feature is to add new datanodes to the pipeline. This is a site-wide property to enable/disable the feature. When the cluster size is extremely small, e.g. 3 nodes or less, cluster administrators may want to set the policy to NEVER in the default configuration file or disable this feature. Otherwise, users may experience an unusually high rate of pipeline failures since it is impossible to find new datanodes for replacement. See also dfs.client.block.write.replace-datanode-on-failure.policy
|
dfs.client.block.write.replace-datanode-on-failure.policy
|
DEFAULT
|
This property is used only if the value of dfs.client.block.write.replace-datanode-on-failure.enable is true. ALWAYS: always add a new datanode when an existing datanode is removed. NEVER: never add a new datanode. DEFAULT: Let r be the replication number. Let n be the number of existing datanodes. Add a new datanode only if r is greater than or equal to 3 and either (1) floor(r/2) is greater than or equal to n; or (2) r is greater than n and the block is hflushed/appended.
|
dfs.client.block.write.replace-datanode-on-failure.best-effort
|
false
|
This property is used only if the value of dfs.client.block.write.replace-datanode-on-failure.enable is true. Best effort means that the client will try to replace a failed datanode in write pipeline (provided that the policy is satisfied), however, it continues the write operation in case that the datanode replacement also fails. Suppose the datanode replacement fails. false: An exception should be thrown so that the write will fail. true : The write should be resumed with the remaining datandoes. Note that setting this property to true allows writing to a pipeline with a smaller number of datanodes. As a result, it increases the probability of data loss.
|
dfs.client.block.write.replace-datanode-on-failure.min-replication
|
0
|
The minimum number of replications that are needed to not to fail the write pipeline if new datanodes can not be found to replace failed datanodes (could be due to network failure) in the write pipeline. If the number of the remaining datanodes in the write pipeline is greater than or equal to this property value, continue writing to the remaining nodes. Otherwise throw exception. If this is set to 0, an exception will be thrown, when a replacement can not be found. See also dfs.client.block.write.replace-datanode-on-failure.policy
|
dfs.blockreport.intervalMsec
|
21600000
|
Determines block reporting interval in milliseconds.
|
dfs.blockreport.initialDelay
|
0
|
Delay for first block report in seconds.
|
dfs.blockreport.split.threshold
|
1000000
|
If the number of blocks on the DataNode is below this threshold then it will send block reports for all Storage Directories in a single message. If the number of blocks exceeds this threshold then the DataNode will send block reports for each Storage Directory in separate messages. Set to zero to always split.
|
dfs.namenode.max.full.block.report.leases
|
6
|
The maximum number of leases for full block reports that the NameNode will issue at any given time. This prevents the NameNode from being flooded with full block reports that use up all the RPC handler threads. This number should never be more than the number of RPC handler threads or less than 1.
|
dfs.namenode.full.block.report.lease.length.ms
|
300000
|
The number of milliseconds that the NameNode will wait before invalidating a full block report lease. This prevents a crashed DataNode from permanently using up a full block report lease.
|
dfs.datanode.directoryscan.interval
|
21600
|
Interval in seconds for Datanode to scan data directories and reconcile the difference between blocks in memory and on the disk.
|
dfs.datanode.directoryscan.threads
|
1
|
How many threads should the threadpool used to compile reports for volumes in parallel have.
|
dfs.datanode.directoryscan.throttle.limit.ms.per.sec
|
1000
|
The report compilation threads are limited to only running for a given number of milliseconds per second, as configured by the property. The limit is taken per thread, not in aggregate, e.g. setting a limit of 100ms for 4 compiler threads will result in each thread being limited to 100ms, not 25ms. Note that the throttle does not interrupt the report compiler threads, so the actual running time of the threads per second will typically be somewhat higher than the throttle limit, usually by no more than 20%. Setting this limit to 1000 disables compiler thread throttling. Only values between 1 and 1000 are valid. Setting an invalid value will result in the throttle being disabled and an error message being logged. 1000 is the default setting.
|
dfs.heartbeat.interval
|
3
|
Determines datanode heartbeat interval in seconds.
|
dfs.datanode.lifeline.interval.seconds
|
Sets the interval in seconds between sending DataNode Lifeline Protocol messages from the DataNode to the NameNode. The value must be greater than the value of dfs.heartbeat.interval. If this property is not defined, then the default behavior is to calculate the interval as 3x the value of dfs.heartbeat.interval. Note that normal heartbeat processing may cause the DataNode to postpone sending lifeline messages if they are not required. Under normal operations with speedy heartbeat processing, it is possible that no lifeline messages will need to be sent at all. This property has no effect if dfs.namenode.lifeline.rpc-address is not defined.
| |
dfs.namenode.handler.count
|
10
|
The number of Namenode RPC server threads that listen to requests from clients. If dfs.namenode.servicerpc-address is not configured then Namenode RPC server threads listen to requests from all nodes.
|
dfs.namenode.service.handler.count
|
10
|
The number of Namenode RPC server threads that listen to requests from DataNodes and from all other non-client nodes. dfs.namenode.service.handler.count will be valid only if dfs.namenode.servicerpc-address is configured.
|
dfs.namenode.lifeline.handler.ratio
|
0.10
|
A ratio applied to the value of dfs.namenode.handler.count, which then provides the number of RPC server threads the NameNode runs for handling the lifeline RPC server. For example, if dfs.namenode.handler.count is 100, and dfs.namenode.lifeline.handler.factor is 0.10, then the NameNode starts 100 * 0.10 = 10 threads for handling the lifeline RPC server. It is common to tune the value of dfs.namenode.handler.count as a function of the number of DataNodes in a cluster. Using this property allows for the lifeline RPC server handler threads to be tuned automatically without needing to touch a separate property. Lifeline message processing is lightweight, so it is expected to require many fewer threads than the main NameNode RPC server. This property is not used if dfs.namenode.lifeline.handler.count is defined, which sets an absolute thread count. This property has no effect if dfs.namenode.lifeline.rpc-address is not defined.
|
dfs.namenode.lifeline.handler.count
|
Sets an absolute number of RPC server threads the NameNode runs for handling the DataNode Lifeline Protocol and HA health check requests from ZKFC. If this property is defined, then it overrides the behavior of dfs.namenode.lifeline.handler.ratio. By default, it is not defined. This property has no effect if dfs.namenode.lifeline.rpc-address is not defined.
| |
dfs.namenode.safemode.threshold-pct
|
0.999f
|
Specifies the percentage of blocks that should satisfy the minimal replication requirement defined by dfs.namenode.replication.min. Values less than or equal to 0 mean not to wait for any particular percentage of blocks before exiting safemode. Values greater than 1 will make safe mode permanent.
|
dfs.namenode.safemode.min.datanodes
|
0
|
Specifies the number of datanodes that must be considered alive before the name node exits safemode. Values less than or equal to 0 mean not to take the number of live datanodes into account when deciding whether to remain in safe mode during startup. Values greater than the number of datanodes in the cluster will make safe mode permanent.
|
dfs.namenode.safemode.extension
|
30000
|
Determines extension of safe mode in milliseconds after the threshold level is reached. Support multiple time unit suffix (case insensitive), as described in dfs.heartbeat.interval.
|
dfs.namenode.resource.check.interval
|
5000
|
The interval in milliseconds at which the NameNode resource checker runs. The checker calculates the number of the NameNode storage volumes whose available spaces are more than dfs.namenode.resource.du.reserved, and enters safemode if the number becomes lower than the minimum value specified by dfs.namenode.resource.checked.volumes.minimum.
|
dfs.namenode.resource.du.reserved
|
104857600
|
The amount of space to reserve/require for a NameNode storage directory in bytes. The default is 100MB.
|
dfs.namenode.resource.checked.volumes
|
A list of local directories for the NameNode resource checker to check in addition to the local edits directories.
| |
dfs.namenode.resource.checked.volumes.minimum
|
1
|
The minimum number of redundant NameNode storage volumes required.
|
dfs.datanode.balance.bandwidthPerSec
|
10m
|
Specifies the maximum amount of bandwidth that each datanode can utilize for the balancing purpose in term of the number of bytes per second. You can use the following suffix (case insensitive): k(kilo), m(mega), g(giga), t(tera), p(peta), e(exa)to specify the size (such as 128k, 512m, 1g, etc.). Or provide complete size in bytes (such as 134217728 for 128 MB).
|
dfs.hosts
|
Names a file that contains a list of hosts that are permitted to connect to the namenode. The full pathname of the file must be specified. If the value is empty, all hosts are permitted.
| |
dfs.hosts.exclude
|
Names a file that contains a list of hosts that are not permitted to connect to the namenode. The full pathname of the file must be specified. If the value is empty, no hosts are excluded.
| |
dfs.namenode.max.objects
|
0
|
The maximum number of files, directories and blocks dfs supports. A value of zero indicates no limit to the number of objects that dfs supports.
|
dfs.namenode.datanode.registration.ip-hostname-check
|
true
|
If true (the default), then the namenode requires that a connecting datanode's address must be resolved to a hostname. If necessary, a reverse DNS lookup is performed. All attempts to register a datanode from an unresolvable address are rejected. It is recommended that this setting be left on to prevent accidental registration of datanodes listed by hostname in the excludes file during a DNS outage. Only set this to false in environments where there is no infrastructure to support reverse DNS lookup.
|
dfs.namenode.decommission.interval
|
30
|
Namenode periodicity in seconds to check if decommission or maintenance is complete. Support multiple time unit suffix(case insensitive), as described in dfs.heartbeat.interval.
|
dfs.namenode.decommission.blocks.per.interval
|
500000
|
The approximate number of blocks to process per decommission or maintenance interval, as defined in dfs.namenode.decommission.interval.
|
dfs.namenode.decommission.max.concurrent.tracked.nodes
|
100
|
The maximum number of decommission-in-progress or entering-maintenance datanodes nodes that will be tracked at one time by the namenode. Tracking these datanode consumes additional NN memory proportional to the number of blocks on the datnode. Having a conservative limit reduces the potential impact of decommissioning or maintenance of a large number of nodes at once. A value of 0 means no limit will be enforced.
|
dfs.namenode.replication.interval
|
3
|
The periodicity in seconds with which the namenode computes replication work for datanodes.
|
dfs.namenode.accesstime.precision
|
3600000
|
The access time for HDFS file is precise upto this value. The default value is 1 hour. Setting a value of 0 disables access times for HDFS.
|
dfs.datanode.plugins
|
Comma-separated list of datanode plug-ins to be activated.
| |
dfs.namenode.plugins
|
Comma-separated list of namenode plug-ins to be activated.
| |
dfs.namenode.block-placement-policy.default.prefer-local-node
|
true
|
Controls how the default block placement policy places the first replica of a block. When true, it will prefer the node where the client is running. When false, it will prefer a node in the same rack as the client. Setting to false avoids situations where entire copies of large files end up on a single node, thus creating hotspots.
|
dfs.stream-buffer-size
|
4096
|
The size of buffer to stream files. The size of this buffer should probably be a multiple of hardware page size (4096 on Intel x86), and it determines how much data is buffered during read and write operations.
|
dfs.bytes-per-checksum
|
512
|
The number of bytes per checksum. Must not be larger than dfs.stream-buffer-size
|
dfs.client-write-packet-size
|
65536
|
Packet size for clients to write
|
dfs.client.write.exclude.nodes.cache.expiry.interval.millis
|
600000
|
The maximum period to keep a DN in the excluded nodes list at a client. After this period, in milliseconds, the previously excluded node(s) will be removed automatically from the cache and will be considered good for block allocations again. Useful to lower or raise in situations where you keep a file open for very long periods (such as a Write-Ahead-Log (WAL) file) to make the writer tolerant to cluster maintenance restarts. Defaults to 10 minutes.
|
dfs.namenode.checkpoint.dir
|
Determines where on the local filesystem the DFS secondary name node should store the temporary images to merge. If this is a comma-delimited list of directories then the image is replicated in all of the directories for redundancy.
| |
dfs.namenode.checkpoint.edits.dir
|
${dfs.namenode.checkpoint.dir}
|
Determines where on the local filesystem the DFS secondary name node should store the temporary edits to merge. If this is a comma-delimited list of directories then the edits is replicated in all of the directories for redundancy. Default value is same as dfs.namenode.checkpoint.dir
|
dfs.namenode.checkpoint.period
|
3600
|
The number of seconds between two periodic checkpoints.
|
dfs.namenode.checkpoint.txns
|
1000000
|
The Secondary NameNode or CheckpointNode will create a checkpoint of the namespace every 'dfs.namenode.checkpoint.txns' transactions, regardless of whether 'dfs.namenode.checkpoint.period' has expired.
|
dfs.namenode.checkpoint.check.period
|
60
|
The SecondaryNameNode and CheckpointNode will poll the NameNode every 'dfs.namenode.checkpoint.check.period' seconds to query the number of uncheckpointed transactions.
|
dfs.namenode.checkpoint.max-retries
|
3
|
The SecondaryNameNode retries failed checkpointing. If the failure occurs while loading fsimage or replaying edits, the number of retries is limited by this variable.
|
dfs.namenode.num.checkpoints.retained
|
2
|
The number of image checkpoint files (fsimage_*) that will be retained by the NameNode and Secondary NameNode in their storage directories. All edit logs (stored on edits_* files) necessary to recover an up-to-date namespace from the oldest retained checkpoint will also be retained.
|
dfs.namenode.num.extra.edits.retained
|
1000000
|
The number of extra transactions which should be retained beyond what is minimally necessary for a NN restart. It does not translate directly to file's age, or the number of files kept, but to the number of transactions (here "edits" means transactions). One edit file may contain several transactions (edits). During checkpoint, NameNode will identify the total number of edits to retain as extra by checking the latest checkpoint transaction value, subtracted by the value of this property. Then, it scans edits files to identify the older ones that don't include the computed range of retained transactions that are to be kept around, and purges them subsequently. The retainment can be useful for audit purposes or for an HA setup where a remote Standby Node may have been offline for some time and need to have a longer backlog of retained edits in order to start again. Typically each edit is on the order of a few hundred bytes, so the default of 1 million edits should be on the order of hundreds of MBs or low GBs. NOTE: Fewer extra edits may be retained than value specified for this setting if doing so would mean that more segments would be retained than the number configured by dfs.namenode.max.extra.edits.segments.retained.
|
dfs.namenode.max.extra.edits.segments.retained
|
10000
|
The maximum number of extra edit log segments which should be retained beyond what is minimally necessary for a NN restart. When used in conjunction with dfs.namenode.num.extra.edits.retained, this configuration property serves to cap the number of extra edits files to a reasonable value.
|
dfs.namenode.delegation.key.update-interval
|
86400000
|
The update interval for master key for delegation tokens in the namenode in milliseconds.
|
dfs.namenode.delegation.token.max-lifetime
|
604800000
|
The maximum lifetime in milliseconds for which a delegation token is valid.
|
dfs.namenode.delegation.token.renew-interval
|
86400000
|
The renewal interval for delegation token in milliseconds.
|
dfs.datanode.failed.volumes.tolerated
|
0
|
The number of volumes that are allowed to fail before a datanode stops offering service. By default any volume failure will cause a datanode to shutdown.
|
dfs.image.compress
|
false
|
Should the dfs image be compressed?
|
dfs.image.compression.codec
|
org.apache.hadoop.io.compress.DefaultCodec
|
If the dfs image is compressed, how should they be compressed? This has to be a codec defined in io.compression.codecs.
|
dfs.image.transfer.timeout
|
60000
|
Socket timeout for the HttpURLConnection instance used in the image transfer. This is measured in milliseconds. This timeout prevents client hangs if the connection is idle for this configured timeout, during image transfer.
|
dfs.image.transfer.bandwidthPerSec
|
0
|
Maximum bandwidth used for regular image transfers (instead of bootstrapping the standby namenode), in bytes per second. This can help keep normal namenode operations responsive during checkpointing. A default value of 0 indicates that throttling is disabled. The maximum bandwidth used for bootstrapping standby namenode is configured with dfs.image.transfer-bootstrap-standby.bandwidthPerSec.
|
dfs.image.transfer-bootstrap-standby.bandwidthPerSec
|
0
|
Maximum bandwidth used for transferring image to bootstrap standby namenode, in bytes per second. A default value of 0 indicates that throttling is disabled. This default value should be used in most cases, to ensure timely HA operations. The maximum bandwidth used for regular image transfers is configured with dfs.image.transfer.bandwidthPerSec.
|
dfs.image.transfer.chunksize
|
65536
|
Chunksize in bytes to upload the checkpoint. Chunked streaming is used to avoid internal buffering of contents of image file of huge size.
|
dfs.namenode.support.allow.format
|
true
|
Does HDFS namenode allow itself to be formatted? You may consider setting this to false for any production cluster, to avoid any possibility of formatting a running DFS.
|
dfs.datanode.max.transfer.threads
|
4096
|
Specifies the maximum number of threads to use for transferring data in and out of the DN.
|
dfs.datanode.scan.period.hours
|
504
|
If this is positive, the DataNode will not scan any individual block more than once in the specified scan period. If this is negative, the block scanner is disabled. If this is set to zero, then the default value of 504 hours or 3 weeks is used. Prior versions of HDFS incorrectly documented that setting this key to zero will disable the block scanner.
|
dfs.block.scanner.volume.bytes.per.second
|
1048576
|
If this is 0, the DataNode's block scanner will be disabled. If this is positive, this is the number of bytes per second that the DataNode's block scanner will try to scan from each volume.
|
dfs.datanode.readahead.bytes
|
4194304
|
While reading block files, if the Hadoop native libraries are available, the datanode can use the posix_fadvise system call to explicitly page data into the operating system buffer cache ahead of the current reader's position. This can improve performance especially when disks are highly contended. This configuration specifies the number of bytes ahead of the current read position which the datanode will attempt to read ahead. This feature may be disabled by configuring this property to 0. If the native libraries are not available, this configuration has no effect.
|
dfs.datanode.drop.cache.behind.reads
|
false
|
In some workloads, the data read from HDFS is known to be significantly large enough that it is unlikely to be useful to cache it in the operating system buffer cache. In this case, the DataNode may be configured to automatically purge all data from the buffer cache after it is delivered to the client. This behavior is automatically disabled for workloads which read only short sections of a block (e.g HBase random-IO workloads). This may improve performance for some workloads by freeing buffer cache space usage for more cacheable data. If the Hadoop native libraries are not available, this configuration has no effect.
|
dfs.datanode.drop.cache.behind.writes
|
false
|
In some workloads, the data written to HDFS is known to be significantly large enough that it is unlikely to be useful to cache it in the operating system buffer cache. In this case, the DataNode may be configured to automatically purge all data from the buffer cache after it is written to disk. This may improve performance for some workloads by freeing buffer cache space usage for more cacheable data. If the Hadoop native libraries are not available, this configuration has no effect.
|
dfs.datanode.sync.behind.writes
|
false
|
If this configuration is enabled, the datanode will instruct the operating system to enqueue all written data to the disk immediately after it is written. This differs from the usual OS policy which may wait for up to 30 seconds before triggering writeback. This may improve performance for some workloads by smoothing the IO profile for data written to disk. If the Hadoop native libraries are not available, this configuration has no effect.
|
dfs.client.failover.max.attempts
|
15
|
Expert only. The number of client failover attempts that should be made before the failover is considered failed.
|
dfs.client.failover.sleep.base.millis
|
500
|
Expert only. The time to wait, in milliseconds, between failover attempts increases exponentially as a function of the number of attempts made so far, with a random factor of +/- 50%. This option specifies the base value used in the failover calculation. The first failover will retry immediately. The 2nd failover attempt will delay at least dfs.client.failover.sleep.base.millis milliseconds. And so on.
|
dfs.client.failover.sleep.max.millis
|
15000
|
Expert only. The time to wait, in milliseconds, between failover attempts increases exponentially as a function of the number of attempts made so far, with a random factor of +/- 50%. This option specifies the maximum value to wait between failovers. Specifically, the time between two failover attempts will not exceed +/- 50% of dfs.client.failover.sleep.max.millis milliseconds.
|
dfs.client.failover.connection.retries
|
0
|
Expert only. Indicates the number of retries a failover IPC client will make to establish a server connection.
|
dfs.client.failover.connection.retries.on.timeouts
|
0
|
Expert only. The number of retry attempts a failover IPC client will make on socket timeout when establishing a server connection.
|
dfs.client.datanode-restart.timeout
|
30
|
Expert only. The time to wait, in seconds, from reception of an datanode shutdown notification for quick restart, until declaring the datanode dead and invoking the normal recovery mechanisms. The notification is sent by a datanode when it is being shutdown using the shutdownDatanode admin command with the upgrade option.
|
dfs.nameservices
|
Comma-separated list of nameservices.
| |
dfs.nameservice.id
|
The ID of this nameservice. If the nameservice ID is not configured or more than one nameservice is configured for dfs.nameservices it is determined automatically by matching the local node's address with the configured address.
| |
dfs.internal.nameservices
|
Comma-separated list of nameservices that belong to this cluster. Datanode will report to all the nameservices in this list. By default this is set to the value of dfs.nameservices.
| |
dfs.ha.namenodes.EXAMPLENAMESERVICE
|
The prefix for a given nameservice, contains a comma-separated list of namenodes for a given nameservice (eg EXAMPLENAMESERVICE). Unique identifiers for each NameNode in the nameservice, delimited by commas. This will be used by DataNodes to determine all the NameNodes in the cluster. For example, if you used “mycluster” as the nameservice ID previously, and you wanted to use “nn1” and “nn2” as the individual IDs of the NameNodes, you would configure a property dfs.ha.namenodes.mycluster, and its value "nn1,nn2".
| |
dfs.ha.namenode.id
|
The ID of this namenode. If the namenode ID is not configured it is determined automatically by matching the local node's address with the configured address.
| |
dfs.ha.log-roll.period
|
120
|
How often, in seconds, the StandbyNode should ask the active to roll edit logs. Since the StandbyNode only reads from finalized log segments, the StandbyNode will only be as up-to-date as how often the logs are rolled. Note that failover triggers a log roll so the StandbyNode will be up to date before it becomes active.
|
dfs.ha.tail-edits.period
|
60
|
How often, in seconds, the StandbyNode should check for new finalized log segments in the shared edits log.
|
dfs.ha.tail-edits.rolledits.timeout
|
60
|
The timeout in seconds of calling rollEdits RPC on Active NN.
|
dfs.ha.automatic-failover.enabled
|
false
|
Whether automatic failover is enabled. See the HDFS High Availability documentation for details on automatic HA configuration.
|
dfs.client.use.datanode.hostname
|
false
|
Whether clients should use datanode hostnames when connecting to datanodes.
|
dfs.datanode.use.datanode.hostname
|
false
|
Whether datanodes should use datanode hostnames when connecting to other datanodes for data transfer.
|
dfs.client.local.interfaces
|
A comma separated list of network interface names to use for data transfer between the client and datanodes. When creating a connection to read from or write to a datanode, the client chooses one of the specified interfaces at random and binds its socket to the IP of that interface. Individual names may be specified as either an interface name (eg "eth0"), a subinterface name (eg "eth0:0"), or an IP address (which may be specified using CIDR notation to match a range of IPs).
| |
dfs.datanode.shared.file.descriptor.paths
|
/dev/shm,/tmp
|
A comma-separated list of paths to use when creating file descriptors that will be shared between the DataNode and the DFSClient. Typically we use /dev/shm, so that the file descriptors will not be written to disk. Systems that don't have /dev/shm will fall back to /tmp by default.
|
dfs.short.circuit.shared.memory.watcher.interrupt.check.ms
|
60000
|
The length of time in milliseconds that the short-circuit shared memory watcher will go between checking for java interruptions sent from other threads. This is provided mainly for unit tests.
|
dfs.namenode.kerberos.principal
|
The NameNode service principal. This is typically set to nn/_HOST@REALM.TLD. Each NameNode will substitute _HOST with its own fully qualified hostname at startup. The _HOST placeholder allows using the same configuration setting on both NameNodes in an HA setup.
| |
dfs.namenode.keytab.file
|
The keytab file used by each NameNode daemon to login as its service principal. The principal name is configured with dfs.namenode.kerberos.principal.
| |
dfs.datanode.kerberos.principal
|
The DataNode service principal. This is typically set to dn/_HOST@REALM.TLD. Each DataNode will substitute _HOST with its own fully qualified hostname at startup. The _HOST placeholder allows using the same configuration setting on all DataNodes.
| |
dfs.datanode.keytab.file
|
The keytab file used by each DataNode daemon to login as its service principal. The principal name is configured with dfs.datanode.kerberos.principal.
| |
dfs.journalnode.kerberos.principal
|
The JournalNode service principal. This is typically set to jn/_HOST@REALM.TLD. Each JournalNode will substitute _HOST with its own fully qualified hostname at startup. The _HOST placeholder allows using the same configuration setting on all JournalNodes.
| |
dfs.journalnode.keytab.file
|
The keytab file used by each JournalNode daemon to login as its service principal. The principal name is configured with dfs.journalnode.kerberos.principal.
| |
dfs.namenode.kerberos.internal.spnego.principal
|
${dfs.web.authentication.kerberos.principal}
|
The server principal used by the NameNode for web UI SPNEGO authentication when Kerberos security is enabled. This is typically set to HTTP/_HOST@REALM.TLD The SPNEGO server principal begins with the prefix HTTP/ by convention. If the value is '*', the web server will attempt to login with every principal specified in the keytab file dfs.web.authentication.kerberos.keytab.
|
dfs.journalnode.kerberos.internal.spnego.principal
|
The server principal used by the JournalNode HTTP Server for SPNEGO authentication when Kerberos security is enabled. This is typically set to HTTP/_HOST@REALM.TLD. The SPNEGO server principal begins with the prefix HTTP/ by convention. If the value is '*', the web server will attempt to login with every principal specified in the keytab file dfs.web.authentication.kerberos.keytab. For most deployments this can be set to ${dfs.web.authentication.kerberos.principal} i.e use the value of dfs.web.authentication.kerberos.principal.
| |
dfs.secondary.namenode.kerberos.internal.spnego.principal
|
${dfs.web.authentication.kerberos.principal}
|
The server principal used by the Secondary NameNode for web UI SPNEGO authentication when Kerberos security is enabled. Like all other Secondary NameNode settings, it is ignored in an HA setup. If the value is '*', the web server will attempt to login with every principal specified in the keytab file dfs.web.authentication.kerberos.keytab.
|
dfs.web.authentication.kerberos.principal
|
The server principal used by the NameNode for WebHDFS SPNEGO authentication. Required when WebHDFS and security are enabled. In most secure clusters this setting is also used to specify the values for dfs.namenode.kerberos.internal.spnego.principal and dfs.journalnode.kerberos.internal.spnego.principal.
| |
dfs.web.authentication.kerberos.keytab
|
The keytab file for the principal corresponding to dfs.web.authentication.kerberos.principal.
| |
dfs.namenode.kerberos.principal.pattern
|
*
|
A client-side RegEx that can be configured to control allowed realms to authenticate with (useful in cross-realm env.)
|
dfs.namenode.avoid.read.stale.datanode
|
false
|
Indicate whether or not to avoid reading from "stale" datanodes whose heartbeat messages have not been received by the namenode for more than a specified time interval. Stale datanodes will be moved to the end of the node list returned for reading. See dfs.namenode.avoid.write.stale.datanode for a similar setting for writes.
|
dfs.namenode.avoid.write.stale.datanode
|
false
|
Indicate whether or not to avoid writing to "stale" datanodes whose heartbeat messages have not been received by the namenode for more than a specified time interval. Writes will avoid using stale datanodes unless more than a configured ratio (dfs.namenode.write.stale.datanode.ratio) of datanodes are marked as stale. See dfs.namenode.avoid.read.stale.datanode for a similar setting for reads.
|
dfs.namenode.stale.datanode.interval
|
30000
|
Default time interval in milliseconds for marking a datanode as "stale", i.e., if the namenode has not received heartbeat msg from a datanode for more than this time interval, the datanode will be marked and treated as "stale" by default. The stale interval cannot be too small since otherwise this may cause too frequent change of stale states. We thus set a minimum stale interval value (the default value is 3 times of heartbeat interval) and guarantee that the stale interval cannot be less than the minimum value. A stale data node is avoided during lease/block recovery. It can be conditionally avoided for reads (see dfs.namenode.avoid.read.stale.datanode) and for writes (see dfs.namenode.avoid.write.stale.datanode).
|
dfs.namenode.write.stale.datanode.ratio
|
0.5f
|
When the ratio of number stale datanodes to total datanodes marked is greater than this ratio, stop avoiding writing to stale nodes so as to prevent causing hotspots.
|
dfs.namenode.invalidate.work.pct.per.iteration
|
0.32f
|
*Note*: Advanced property. Change with caution. This determines the percentage amount of block invalidations (deletes) to do over a single DN heartbeat deletion command. The final deletion count is determined by applying this percentage to the number of live nodes in the system. The resultant number is the number of blocks from the deletion list chosen for proper invalidation over a single heartbeat of a single DN. Value should be a positive, non-zero percentage in float notation (X.Yf), with 1.0f meaning 100%.
|
dfs.namenode.replication.work.multiplier.per.iteration
|
2
|
*Note*: Advanced property. Change with caution. This determines the total amount of block transfers to begin in parallel at a DN, for replication, when such a command list is being sent over a DN heartbeat by the NN. The actual number is obtained by multiplying this multiplier with the total number of live nodes in the cluster. The result number is the number of blocks to begin transfers immediately for, per DN heartbeat. This number can be any positive, non-zero integer.
|
nfs.server.port
|
2049
|
Specify the port number used by Hadoop NFS.
|
nfs.mountd.port
|
4242
|
Specify the port number used by Hadoop mount daemon.
|
nfs.dump.dir
|
/tmp/.hdfs-nfs
|
This directory is used to temporarily save out-of-order writes before writing to HDFS. For each file, the out-of-order writes are dumped after they are accumulated to exceed certain threshold (e.g., 1MB) in memory. One needs to make sure the directory has enough space.
|
nfs.rtmax
|
1048576
|
This is the maximum size in bytes of a READ request supported by the NFS gateway. If you change this, make sure you also update the nfs mount's rsize(add rsize= # of bytes to the mount directive).
|
nfs.wtmax
|
1048576
|
This is the maximum size in bytes of a WRITE request supported by the NFS gateway. If you change this, make sure you also update the nfs mount's wsize(add wsize= # of bytes to the mount directive).
|
nfs.keytab.file
|
*Note*: Advanced property. Change with caution. This is the path to the keytab file for the hdfs-nfs gateway. This is required when the cluster is kerberized.
| |
nfs.kerberos.principal
|
*Note*: Advanced property. Change with caution. This is the name of the kerberos principal. This is required when the cluster is kerberized.It must be of this format: nfs-gateway-user/nfs-gateway-host@kerberos-realm
| |
nfs.allow.insecure.ports
|
true
|
When set to false, client connections originating from unprivileged ports (those above 1023) will be rejected. This is to ensure that clients connecting to this NFS Gateway must have had root privilege on the machine where they're connecting from.
|
dfs.webhdfs.enabled
|
true
|
Enable WebHDFS (REST API) in Namenodes and Datanodes.
|
hadoop.fuse.connection.timeout
|
300
|
The minimum number of seconds that we'll cache libhdfs connection objects in fuse_dfs. Lower values will result in lower memory consumption; higher values may speed up access by avoiding the overhead of creating new connection objects.
|
hadoop.fuse.timer.period
|
5
|
The number of seconds between cache expiry checks in fuse_dfs. Lower values will result in fuse_dfs noticing changes to Kerberos ticket caches more quickly.
|
dfs.namenode.metrics.logger.period.seconds
|
600
|
This setting controls how frequently the NameNode logs its metrics. The logging configuration must also define one or more appenders for NameNodeMetricsLog for the metrics to be logged. NameNode metrics logging is disabled if this value is set to zero or less than zero.
|
dfs.datanode.metrics.logger.period.seconds
|
600
|
This setting controls how frequently the DataNode logs its metrics. The logging configuration must also define one or more appenders for DataNodeMetricsLog for the metrics to be logged. DataNode metrics logging is disabled if this value is set to zero or less than zero.
|
dfs.metrics.percentiles.intervals
|
Comma-delimited set of integers denoting the desired rollover intervals (in seconds) for percentile latency metrics on the Namenode and Datanode. By default, percentile latency metrics are disabled.
| |
dfs.datanode.peer.stats.enabled
|
false
|
A switch to turn on/off tracking DataNode peer statistics.
|
dfs.datanode.outliers.report.interval
|
1800000
|
This setting controls how frequently DataNodes will report their peer latencies to the NameNode via heartbeats. This setting supports multiple time unit suffixes as described in dfs.heartbeat.interval. If no suffix is specified then milliseconds is assumed. It is ignored if dfs.datanode.peer.stats.enabled is false.
|
dfs.datanode.fileio.profiling.sampling.percentage
|
0
|
This setting controls the percentage of file I/O events which will be profiled for DataNode disk statistics. The default value of 0 disables disk statistics. Set to an integer value between 1 and 100 to enable disk statistics.
|
hadoop.user.group.metrics.percentiles.intervals
|
A comma-separated list of the granularity in seconds for the metrics which describe the 50/75/90/95/99th percentile latency for group resolution in milliseconds. By default, percentile latency metrics are disabled.
| |
dfs.encrypt.data.transfer
|
false
|
Whether or not actual block data that is read/written from/to HDFS should be encrypted on the wire. This only needs to be set on the NN and DNs, clients will deduce this automatically. It is possible to override this setting per connection by specifying custom logic via dfs.trustedchannel.resolver.class.
|
dfs.encrypt.data.transfer.algorithm
|
This value may be set to either "3des" or "rc4". If nothing is set, then the configured JCE default on the system is used (usually 3DES.) It is widely believed that 3DES is more cryptographically secure, but RC4 is substantially faster. Note that if AES is supported by both the client and server then this encryption algorithm will only be used to initially transfer keys for AES. (See dfs.encrypt.data.transfer.cipher.suites.)
| |
dfs.encrypt.data.transfer.cipher.suites
|
This value may be either undefined or AES/CTR/NoPadding. If defined, then dfs.encrypt.data.transfer uses the specified cipher suite for data encryption. If not defined, then only the algorithm specified in dfs.encrypt.data.transfer.algorithm is used. By default, the property is not defined.
| |
dfs.encrypt.data.transfer.cipher.key.bitlength
|
128
|
The key bitlength negotiated by dfsclient and datanode for encryption. This value may be set to either 128, 192 or 256.
|
dfs.trustedchannel.resolver.class
|
TrustedChannelResolver is used to determine whether a channel is trusted for plain data transfer. The TrustedChannelResolver is invoked on both client and server side. If the resolver indicates that the channel is trusted, then the data transfer will not be encrypted even if dfs.encrypt.data.transfer is set to true. The default implementation returns false indicating that the channel is not trusted.
| |
dfs.data.transfer.protection
|
A comma-separated list of SASL protection values used for secured connections to the DataNode when reading or writing block data. Possible values are authentication, integrity and privacy. authentication means authentication only and no integrity or privacy; integrity implies authentication and integrity are enabled; and privacy implies all of authentication, integrity and privacy are enabled. If dfs.encrypt.data.transfer is set to true, then it supersedes the setting for dfs.data.transfer.protection and enforces that all connections must use a specialized encrypted SASL handshake. This property is ignored for connections to a DataNode listening on a privileged port. In this case, it is assumed that the use of a privileged port establishes sufficient trust.
| |
dfs.data.transfer.saslproperties.resolver.class
|
SaslPropertiesResolver used to resolve the QOP used for a connection to the DataNode when reading or writing block data. If not specified, the value of hadoop.security.saslproperties.resolver.class is used as the default value.
| |
dfs.datanode.hdfs-blocks-metadata.enabled
|
false
|
Boolean which enables backend datanode-side support for the experimental DistributedFileSystem#getFileVBlockStorageLocations API.
|
dfs.client.file-block-storage-locations.num-threads
|
10
|
Number of threads used for making parallel RPCs in DistributedFileSystem#getFileBlockStorageLocations().
|
dfs.client.file-block-storage-locations.timeout.millis
|
1000
|
Timeout (in milliseconds) for the parallel RPCs made in DistributedFileSystem#getFileBlockStorageLocations().
|
dfs.journalnode.rpc-address
|
0.0.0.0:8485
|
The JournalNode RPC server address and port.
|
dfs.journalnode.rpc-bind-host
|
The actual address the RPC server will bind to. If this optional address is set, it overrides only the hostname portion of dfs.journalnode.rpc-address. This is useful for making the JournalNode listen on all interfaces by setting it to 0.0.0.0.
| |
dfs.journalnode.http-address
|
0.0.0.0:8480
|
The address and port the JournalNode HTTP server listens on. If the port is 0 then the server will start on a free port.
|
dfs.journalnode.http-bind-host
|
The actual address the HTTP server will bind to. If this optional address is set, it overrides only the hostname portion of dfs.journalnode.http-address. This is useful for making the JournalNode HTTP server listen on allinterfaces by setting it to 0.0.0.0.
| |
dfs.journalnode.https-address
|
0.0.0.0:8481
|
The address and port the JournalNode HTTPS server listens on. If the port is 0 then the server will start on a free port.
|
dfs.journalnode.https-bind-host
|
The actual address the HTTP server will bind to. If this optional address is set, it overrides only the hostname portion of dfs.journalnode.https-address. This is useful for making the JournalNode HTTP server listen on all interfaces by setting it to 0.0.0.0.
| |
dfs.namenode.audit.loggers
|
default
|
List of classes implementing audit loggers that will receive audit events. These should be implementations of org.apache.hadoop.hdfs.server.namenode.AuditLogger. The special value "default" can be used to reference the default audit logger, which uses the configured log system. Installing custom audit loggers may affect the performance and stability of the NameNode. Refer to the custom logger's documentation for more details.
|
dfs.datanode.available-space-volume-choosing-policy.balanced-space-threshold
|
10737418240
|
Only used when the dfs.datanode.fsdataset.volume.choosing.policy is set to org.apache.hadoop.hdfs.server.datanode.fsdataset.AvailableSpaceVolumeChoosingPolicy. This setting controls how much DN volumes are allowed to differ in terms of bytes of free disk space before they are considered imbalanced. If the free space of all the volumes are within this range of each other, the volumes will be considered balanced and block assignments will be done on a pure round robin basis.
|
dfs.datanode.available-space-volume-choosing-policy.balanced-space-preference-fraction
|
0.75f
|
Only used when the dfs.datanode.fsdataset.volume.choosing.policy is set to org.apache.hadoop.hdfs.server.datanode.fsdataset.AvailableSpaceVolumeChoosingPolicy. This setting controls what percentage of new block allocations will be sent to volumes with more available disk space than others. This setting should be in the range 0.0 - 1.0, though in practice 0.5 - 1.0, since there should be no reason to prefer that volumes with less available disk space receive more block allocations.
|
dfs.namenode.edits.noeditlogchannelflush
|
false
|
Specifies whether to flush edit log file channel. When set, expensive FileChannel#force calls are skipped and synchronous disk writes are enabled instead by opening the edit log file with RandomAccessFile("rws") flags. This can significantly improve the performance of edit log writes on the Windows platform. Note that the behavior of the "rws" flags is platform and hardware specific and might not provide the same level of guarantees as FileChannel#force. For example, the write will skip the disk-cache on SAS and SCSI devices while it might not on SATA devices. This is an expert level setting, change with caution.
|
dfs.client.cache.drop.behind.writes
|
Just like dfs.datanode.drop.cache.behind.writes, this setting causes the page cache to be dropped behind HDFS writes, potentially freeing up more memory for other uses. Unlike dfs.datanode.drop.cache.behind.writes, this is a client-side setting rather than a setting for the entire datanode. If present, this setting will override the DataNode default. If the native libraries are not available to the DataNode, this configuration has no effect.
| |
dfs.client.cache.drop.behind.reads
|
Just like dfs.datanode.drop.cache.behind.reads, this setting causes the page cache to be dropped behind HDFS reads, potentially freeing up more memory for other uses. Unlike dfs.datanode.drop.cache.behind.reads, this is a client-side setting rather than a setting for the entire datanode. If present, this setting will override the DataNode default. If the native libraries are not available to the DataNode, this configuration has no effect.
| |
dfs.client.cache.readahead
|
When using remote reads, this setting causes the datanode to read ahead in the block file using posix_fadvise, potentially decreasing I/O wait times. Unlike dfs.datanode.readahead.bytes, this is a client-side setting rather than a setting for the entire datanode. If present, this setting will override the DataNode default. When using local reads, this setting determines how much readahead we do in BlockReaderLocal. If the native libraries are not available to the DataNode, this configuration has no effect.
| |
dfs.client.server-defaults.validity.period.ms
|
3600000
|
The amount of milliseconds after which cached server defaults are updated. By default this parameter is set to 1 hour.
|
dfs.namenode.enable.retrycache
|
true
|
This enables the retry cache on the namenode. Namenode tracks for non-idempotent requests the corresponding response. If a client retries the request, the response from the retry cache is sent. Such operations are tagged with annotation @AtMostOnce in namenode protocols. It is recommended that this flag be set to true. Setting it to false, will result in clients getting failure responses to retried request. This flag must be enabled in HA setup for transparent fail-overs. The entries in the cache have expiration time configurable using dfs.namenode.retrycache.expirytime.millis.
|
dfs.namenode.retrycache.expirytime.millis
|
600000
|
The time for which retry cache entries are retained.
|
dfs.namenode.retrycache.heap.percent
|
0.03f
|
This parameter configures the heap size allocated for retry cache (excluding the response cached). This corresponds to approximately 4096 entries for every 64MB of namenode process java heap size. Assuming retry cache entry expiration time (configured using dfs.namenode.retrycache.expirytime.millis) of 10 minutes, this enables retry cache to support 7 operations per second sustained for 10 minutes. As the heap size is increased, the operation rate linearly increases.
|
dfs.client.mmap.enabled
|
true
|
If this is set to false, the client won't attempt to perform memory-mapped reads.
|
dfs.client.mmap.cache.size
|
256
|
When zero-copy reads are used, the DFSClient keeps a cache of recently used memory mapped regions. This parameter controls the maximum number of entries that we will keep in that cache. The larger this number is, the more file descriptors we will potentially use for memory-mapped files. mmaped files also use virtual address space. You may need to increase your ulimit virtual address space limits before increasing the client mmap cache size. Note that you can still do zero-copy reads when this size is set to 0.
|
dfs.client.mmap.cache.timeout.ms
|
3600000
|
The minimum length of time that we will keep an mmap entry in the cache between uses. If an entry is in the cache longer than this, and nobody uses it, it will be removed by a background thread.
|
dfs.client.mmap.retry.timeout.ms
|
300000
|
The minimum amount of time that we will wait before retrying a failed mmap operation.
|
dfs.client.short.circuit.replica.stale.threshold.ms
|
1800000
|
The maximum amount of time that we will consider a short-circuit replica to be valid, if there is no communication from the DataNode. After this time has elapsed, we will re-fetch the short-circuit replica even if it is in the cache.
|
dfs.namenode.path.based.cache.block.map.allocation.percent
|
0.25
|
The percentage of the Java heap which we will allocate to the cached blocks map. The cached blocks map is a hash map which uses chained hashing. Smaller maps may be accessed more slowly if the number of cached blocks is large; larger maps will consume more memory.
|
dfs.datanode.max.locked.memory
|
0
|
The amount of memory in bytes to use for caching of block replicas in memory on the datanode. The datanode's maximum locked memory soft ulimit (RLIMIT_MEMLOCK) must be set to at least this value, else the datanode will abort on startup. By default, this parameter is set to 0, which disables in-memory caching. If the native libraries are not available to the DataNode, this configuration has no effect.
|
dfs.namenode.list.cache.directives.num.responses
|
100
|
This value controls the number of cache directives that the NameNode will send over the wire in response to a listDirectives RPC.
|
dfs.namenode.list.cache.pools.num.responses
|
100
|
This value controls the number of cache pools that the NameNode will send over the wire in response to a listPools RPC.
|
dfs.namenode.path.based.cache.refresh.interval.ms
|
30000
|
The amount of milliseconds between subsequent path cache rescans. Path cache rescans are when we calculate which blocks should be cached, and on what datanodes. By default, this parameter is set to 30 seconds.
|
dfs.namenode.path.based.cache.retry.interval.ms
|
30000
|
When the NameNode needs to uncache something that is cached, or cache something that is not cached, it must direct the DataNodes to do so by sending a DNA_CACHE or DNA_UNCACHE command in response to a DataNode heartbeat. This parameter controls how frequently the NameNode will resend these commands.
|
dfs.datanode.fsdatasetcache.max.threads.per.volume
|
4
|
The maximum number of threads per volume to use for caching new data on the datanode. These threads consume both I/O and CPU. This can affect normal datanode operations.
|
dfs.cachereport.intervalMsec
|
10000
|
Determines cache reporting interval in milliseconds. After this amount of time, the DataNode sends a full report of its cache state to the NameNode. The NameNode uses the cache report to update its map of cached blocks to DataNode locations. This configuration has no effect if in-memory caching has been disabled by setting dfs.datanode.max.locked.memory to 0 (which is the default). If the native libraries are not available to the DataNode, this configuration has no effect.
|
dfs.namenode.edit.log.autoroll.multiplier.threshold
|
2.0
|
Determines when an active namenode will roll its own edit log. The actual threshold (in number of edits) is determined by multiplying this value by dfs.namenode.checkpoint.txns. This prevents extremely large edit files from accumulating on the active namenode, which can cause timeouts during namenode startup and pose an administrative hassle. This behavior is intended as a failsafe for when the standby or secondary namenode fail to roll the edit log by the normal checkpoint threshold.
|
dfs.namenode.edit.log.autoroll.check.interval.ms
|
300000
|
How often an active namenode will check if it needs to roll its edit log, in milliseconds.
|
dfs.webhdfs.user.provider.user.pattern
|
^[A-Za-z_][A-Za-z0-9._-]*[$]?$
|
Valid pattern for user and group names for webhdfs, it must be a valid java regex.
|
dfs.webhdfs.acl.provider.permission.pattern
|
^(default:)?(user|group|mask|other):[[A-Za-z_][A-Za-z0-9._-]]*:([rwx-]{3})?(,(default:)?(user|group|mask|other):[[A-Za-z_][A-Za-z0-9._-]]*:([rwx-]{3})?)*$
|
Valid pattern for user and group names in webhdfs acl operations, it must be a valid java regex.
|
dfs.webhdfs.socket.connect-timeout
|
60s
|
Socket timeout for connecting to WebHDFS servers. This prevents a WebHDFS client from hanging if the server hostname is misconfigured, or the server does not response before the timeout expires. Value is followed by a unit specifier: ns, us, ms, s, m, h, d for nanoseconds, microseconds, milliseconds, seconds, minutes, hours, days respectively. Values should provide units, but milliseconds are assumed.
|
dfs.webhdfs.socket.read-timeout
|
60s
|
Socket timeout for reading data from WebHDFS servers. This prevents a WebHDFS client from hanging if the server stops sending data. Value is followed by a unit specifier: ns, us, ms, s, m, h, d for nanoseconds, microseconds, milliseconds, seconds, minutes, hours, days respectively. Values should provide units, but milliseconds are assumed.
|
dfs.client.context
|
default
|
The name of the DFSClient context that we should use. Clients that share a context share a socket cache and short-circuit cache, among other things. You should only change this if you don't want to share with another set of threads.
|
dfs.client.read.shortcircuit
|
false
|
This configuration parameter turns on short-circuit local reads.
|
dfs.client.socket.send.buffer.size
|
0
|
Socket send buffer size for a write pipeline in DFSClient side. This may affect TCP connection throughput. If it is set to zero or negative value, no buffer size will be set explicitly, thus enable tcp auto-tuning on some system. The default value is 0.
|
dfs.domain.socket.path
|
Optional. This is a path to a UNIX domain socket that will be used for communication between the DataNode and local HDFS clients. If the string "_PORT" is present in this path, it will be replaced by the TCP port of the DataNode.
| |
dfs.client.read.shortcircuit.skip.checksum
|
false
|
If this configuration parameter is set, short-circuit local reads will skip checksums. This is normally not recommended, but it may be useful for special setups. You might consider using this if you are doing your own checksumming outside of HDFS.
|
dfs.client.read.shortcircuit.streams.cache.size
|
256
|
The DFSClient maintains a cache of recently opened file descriptors. This parameter controls the maximum number of file descriptors in the cache. Setting this higher will use more file descriptors, but potentially provide better performance on workloads involving lots of seeks.
|
dfs.client.read.shortcircuit.streams.cache.expiry.ms
|
300000
|
This controls the minimum amount of time file descriptors need to sit in the client cache context before they can be closed for being inactive for too long.
|
dfs.datanode.shared.file.descriptor.paths
|
/dev/shm,/tmp
|
Comma separated paths to the directory on which shared memory segments are created. The client and the DataNode exchange information via this shared memory segment. It tries paths in order until creation of shared memory segment succeeds.
|
dfs.namenode.audit.log.debug.cmdlist
|
A comma separated list of NameNode commands that are written to the HDFS namenode audit log only if the audit log level is debug.
| |
dfs.client.use.legacy.blockreader.local
|
false
|
Legacy short-circuit reader implementation based on HDFS-2246 is used if this configuration parameter is true. This is for the platforms other than Linux where the new implementation based on HDFS-347 is not available.
|
dfs.block.local-path-access.user
|
Comma separated list of the users allowed to open block files on legacy short-circuit local read.
| |
dfs.client.domain.socket.data.traffic
|
false
|
This control whether we will try to pass normal data traffic over UNIX domain socket rather than over TCP socket on node-local data transfer. This is currently experimental and turned off by default.
|
dfs.namenode.reject-unresolved-dn-topology-mapping
|
false
|
If the value is set to true, then namenode will reject datanode registration if the topology mapping for a datanode is not resolved and NULL is returned (script defined by net.topology.script.file.name fails to execute). Otherwise, datanode will be registered and the default rack will be assigned as the topology path. Topology paths are important for data resiliency, since they define fault domains. Thus it may be unwanted behavior to allow datanode registration with the default rack if the resolving topology failed.
|
dfs.client.slow.io.warning.threshold.ms
|
30000
|
The threshold in milliseconds at which we will log a slow io warning in a dfsclient. By default, this parameter is set to 30000 milliseconds (30 seconds).
|
dfs.datanode.slow.io.warning.threshold.ms
|
300
|
The threshold in milliseconds at which we will log a slow io warning in a datanode. By default, this parameter is set to 300 milliseconds.
|
dfs.namenode.xattrs.enabled
|
true
|
Whether support for extended attributes is enabled on the NameNode.
|
dfs.namenode.fs-limits.max-xattrs-per-inode
|
32
|
Maximum number of extended attributes per inode.
|
dfs.namenode.fs-limits.max-xattr-size
|
16384
|
The maximum combined size of the name and value of an extended attribute in bytes. It should be larger than 0, and less than or equal to maximum size hard limit which is 32768.
|
dfs.namenode.lease-recheck-interval-ms
|
2000
|
During the release of lease a lock is hold that make any operations on the namenode stuck. In order to not block them during a too long duration we stop releasing lease after this max lock limit.
|
dfs.namenode.max-lock-hold-to-release-lease-ms
|
25
|
During the release of lease a lock is hold that make any operations on the namenode stuck. In order to not block them during a too long duration we stop releasing lease after this max lock limit.
|
dfs.namenode.write-lock-reporting-threshold-ms
|
5000
|
When a write lock is held on the namenode for a long time, this will be logged as the lock is released. This sets how long the lock must be held for logging to occur.
|
dfs.namenode.read-lock-reporting-threshold-ms
|
5000
|
When a read lock is held on the namenode for a long time, this will be logged as the lock is released. This sets how long the lock must be held for logging to occur.
|
dfs.namenode.lock.detailed-metrics.enabled
|
false
|
If true, the namenode will keep track of how long various operations hold the Namesystem lock for and emit this as metrics. These metrics have names of the form FSN(Read|Write)LockNanosOperationName, where OperationName denotes the name of the operation that initiated the lock hold (this will be OTHER for certain uncategorized operations) and they export the hold time values in nanoseconds.
|
dfs.namenode.fslock.fair
|
true
|
If this is true, the FS Namesystem lock will be used in Fair mode, which will help to prevent writer threads from being starved, but can provide lower lock throughput. See java.util.concurrent.locks.ReentrantReadWriteLock for more information on fair/non-fair locks.
|
dfs.namenode.startup.delay.block.deletion.sec
|
0
|
The delay in seconds at which we will pause the blocks deletion after Namenode startup. By default it's disabled. In the case a directory has large number of directories and files are deleted, suggested delay is one hour to give the administrator enough time to notice large number of pending deletion blocks and take corrective action.
|
dfs.namenode.list.encryption.zones.num.responses
|
100
|
When listing encryption zones, the maximum number of zones that will be returned in a batch. Fetching the list incrementally in batches improves namenode performance.
|
dfs.namenode.list.openfiles.num.responses
|
1000
|
When listing open files, the maximum number of open files that will be returned in a single batch. Fetching the list incrementally in batches improves namenode performance.
|
dfs.namenode.edekcacheloader.interval.ms
|
1000
|
When KeyProvider is configured, the interval time of warming up edek cache on NN starts up / becomes active. All edeks will be loaded from KMS into provider cache. The edek cache loader will try to warm up the cache until succeed or NN leaves active state.
|
dfs.namenode.edekcacheloader.initial.delay.ms
|
3000
|
When KeyProvider is configured, the time delayed until the first attempt to warm up edek cache on NN start up / become active.
|
dfs.namenode.inotify.max.events.per.rpc
|
1000
|
Maximum number of events that will be sent to an inotify client in a single RPC response. The default value attempts to amortize away the overhead for this RPC while avoiding huge memory requirements for the client and NameNode (1000 events should consume no more than 1 MB.)
|
dfs.user.home.dir.prefix
|
/user
|
The directory to prepend to user name to get the user's home direcotry.
|
dfs.datanode.cache.revocation.timeout.ms
|
900000
|
When the DFSClient reads from a block file which the DataNode is caching, the DFSClient can skip verifying checksums. The DataNode will keep the block file in cache until the client is done. If the client takes an unusually long time, though, the DataNode may need to evict the block file from the cache anyway. This value controls how long the DataNode will wait for the client to release a replica that it is reading without checksums.
|
dfs.datanode.cache.revocation.polling.ms
|
500
|
How often the DataNode should poll to see if the clients have stopped using a replica that the DataNode wants to uncache.
|
dfs.datanode.block.id.layout.upgrade.threads
|
12
|
The number of threads to use when creating hard links from current to previous blocks during upgrade of a DataNode to block ID-based block layout (see HDFS-6482 for details on the layout).
|
dfs.storage.policy.enabled
|
true
|
Allow users to change the storage policy on files and directories.
|
dfs.namenode.legacy-oiv-image.dir
|
Determines where to save the namespace in the old fsimage format during checkpointing by standby NameNode or SecondaryNameNode. Users can dump the contents of the old format fsimage by oiv_legacy command. If the value is not specified, old format fsimage will not be saved in checkpoint.
| |
dfs.namenode.top.enabled
|
true
|
Enable nntop: reporting top users on namenode
|
dfs.namenode.top.window.num.buckets
|
10
|
Number of buckets in the rolling window implementation of nntop
|
dfs.namenode.top.num.users
|
10
|
Number of top users returned by the top tool
|
dfs.namenode.top.windows.minutes
|
1,5,25
|
comma separated list of nntop reporting periods in minutes
|
dfs.webhdfs.ugi.expire.after.access
|
600000
|
How long in milliseconds after the last access the cached UGI will expire. With 0, never expire.
|
dfs.namenode.blocks.per.postponedblocks.rescan
|
10000
|
Number of blocks to rescan for each iteration of postponedMisreplicatedBlocks.
|
dfs.datanode.block-pinning.enabled
|
false
|
Whether pin blocks on favored DataNode.
|
dfs.client.block.write.locateFollowingBlock.initial.delay.ms
|
400
|
The initial delay (unit is ms) for locateFollowingBlock, the delay time will increase exponentially(double) for each retry.
|
dfs.ha.zkfc.nn.http.timeout.ms
|
20000
|
The HTTP connection and read timeout value (unit is ms ) when DFS ZKFC tries to get local NN thread dump after local NN becomes SERVICE_NOT_RESPONDING or SERVICE_UNHEALTHY. If it is set to zero, DFS ZKFC won't get local NN thread dump.
|
dfs.namenode.quota.init-threads
|
4
|
The number of concurrent threads to be used in quota initialization. The speed of quota initialization also affects the namenode fail-over latency. If the size of name space is big, try increasing this.
|
dfs.datanode.transfer.socket.send.buffer.size
|
0
|
Socket send buffer size for DataXceiver (mirroring packets to downstream in pipeline). This may affect TCP connection throughput. If it is set to zero or negative value, no buffer size will be set explicitly, thus enable tcp auto-tuning on some system. The default value is 0.
|
dfs.datanode.transfer.socket.recv.buffer.size
|
0
|
Socket receive buffer size for DataXceiver (receiving packets from client during block writing). This may affect TCP connection throughput. If it is set to zero or negative value, no buffer size will be set explicitly, thus enable tcp auto-tuning on some system. The default value is 0.
|
dfs.namenode.upgrade.domain.factor
|
${dfs.replication}
|
This is valid only when block placement policy is set to BlockPlacementPolicyWithUpgradeDomain. It defines the number of unique upgrade domains any block's replicas should have. When the number of replicas is less or equal to this value, the policy ensures each replica has an unique upgrade domain. When the number of replicas is greater than this value, the policy ensures the number of unique domains is at least this value.
|
dfs.ha.zkfc.port
|
8019
|
RPC port for Zookeeper Failover Controller.
|
dfs.datanode.bp-ready.timeout
|
20
|
The maximum wait time for datanode to be ready before failing the received request. Setting this to 0 fails requests right away if the datanode is not yet registered with the namenode. This wait time reduces initial request failures after datanode restart.
|
dfs.datanode.cached-dfsused.check.interval.ms
|
600000
|
The interval check time of loading DU_CACHE_FILE in each volume. When the cluster doing the rolling upgrade operations, it will usually lead dfsUsed cache file of each volume expired and redo the du operations in datanode and that makes datanode start slowly. Adjust this property can make cache file be available for the time as you want.
|
dfs.webhdfs.rest-csrf.enabled
|
false
|
If true, then enables WebHDFS protection against cross-site request forgery (CSRF). The WebHDFS client also uses this property to determine whether or not it needs to send the custom CSRF prevention header in its HTTP requests.
|
dfs.webhdfs.rest-csrf.custom-header
|
X-XSRF-HEADER
|
The name of a custom header that HTTP requests must send when protection against cross-site request forgery (CSRF) is enabled for WebHDFS by setting dfs.webhdfs.rest-csrf.enabled to true. The WebHDFS client also uses this property to determine whether or not it needs to send the custom CSRF prevention header in its HTTP requests.
|
dfs.webhdfs.rest-csrf.methods-to-ignore
|
GET,OPTIONS,HEAD,TRACE
|
A comma-separated list of HTTP methods that do not require HTTP requests to include a custom header when protection against cross-site request forgery (CSRF) is enabled for WebHDFS by setting dfs.webhdfs.rest-csrf.enabled to true. The WebHDFS client also uses this property to determine whether or not it needs to send the custom CSRF prevention header in its HTTP requests.
|
dfs.webhdfs.rest-csrf.browser-useragents-regex
|
^Mozilla.*,^Opera.*
|
A comma-separated list of regular expressions used to match against an HTTP request's User-Agent header when protection against cross-site request forgery (CSRF) is enabled for WebHDFS by setting dfs.webhdfs.reset-csrf.enabled to true. If the incoming User-Agent matches any of these regular expressions, then the request is considered to be sent by a browser, and therefore CSRF prevention is enforced. If the request's User-Agent does not match any of these regular expressions, then the request is considered to be sent by something other than a browser, such as scripted automation. In this case, CSRF is not a potential attack vector, so the prevention is not enforced. This helps achieve backwards-compatibility with existing automation that has not been updated to send the CSRF prevention header.
|
dfs.xframe.enabled
|
true
|
If true, then enables protection against clickjacking by returning X_FRAME_OPTIONS header value set to SAMEORIGIN. Clickjacking protection prevents an attacker from using transparent or opaque layers to trick a user into clicking on a button or link on another page.
|
dfs.xframe.value
|
SAMEORIGIN
|
This configration value allows user to specify the value for the X-FRAME-OPTIONS. The possible values for this field are DENY, SAMEORIGIN and ALLOW-FROM. Any other value will throw an exception when namenode and datanodes are starting up.
|
dfs.http.client.retry.policy.enabled
|
false
|
If "true", enable the retry policy of WebHDFS client. If "false", retry policy is turned off. Enabling the retry policy can be quite useful while using WebHDFS to copy large files between clusters that could timeout, or copy files between HA clusters that could failover during the copy.
|
dfs.http.client.retry.policy.spec
|
10000,6,60000,10
|
Specify a policy of multiple linear random retry for WebHDFS client, e.g. given pairs of number of retries and sleep time (n0, t0), (n1, t1), ..., the first n0 retries sleep t0 milliseconds on average, the following n1 retries sleep t1 milliseconds on average, and so on.
|
dfs.http.client.failover.max.attempts
|
15
|
Specify the max number of failover attempts for WebHDFS client in case of network exception.
|
dfs.http.client.retry.max.attempts
|
10
|
Specify the max number of retry attempts for WebHDFS client, if the difference between retried attempts and failovered attempts is larger than the max number of retry attempts, there will be no more retries.
|
dfs.http.client.failover.sleep.base.millis
|
500
|
Specify the base amount of time in milliseconds upon which the exponentially increased sleep time between retries or failovers is calculated for WebHDFS client.
|
dfs.http.client.failover.sleep.max.millis
|
15000
|
Specify the upper bound of sleep time in milliseconds between retries or failovers for WebHDFS client.
|
dfs.namenode.hosts.provider.classname
|
org.apache.hadoop.hdfs.server.blockmanagement.HostFileManager
|
The class that provides access for host files. org.apache.hadoop.hdfs.server.blockmanagement.HostFileManager is used by default which loads files specified by dfs.hosts and dfs.hosts.exclude. If org.apache.hadoop.hdfs.server.blockmanagement.CombinedHostFileManager is used, it will load the JSON file defined in dfs.hosts. To change class name, nn restart is required. "dfsadmin -refreshNodes" only refreshes the configuration files used by the class.
|
datanode.https.port
|
50475
|
HTTPS port for DataNode.
|
dfs.balancer.dispatcherThreads
|
200
|
Size of the thread pool for the HDFS balancer block mover. dispatchExecutor
|
dfs.balancer.movedWinWidth
|
5400000
|
Window of time in ms for the HDFS balancer tracking blocks and its locations.
|
dfs.balancer.moverThreads
|
1000
|
Thread pool size for executing block moves. moverThreadAllocator
|
dfs.balancer.max-size-to-move
|
10737418240
|
Maximum number of bytes that can be moved by the balancer in a single thread.
|
dfs.balancer.getBlocks.min-block-size
|
10485760
|
Minimum block threshold size in bytes to ignore when fetching a source's block list.
|
dfs.balancer.getBlocks.size
|
2147483648
|
Total size in bytes of Datanode blocks to get when fetching a source's block list.
|
dfs.balancer.block-move.timeout
|
0
|
Maximum amount of time in milliseconds for a block to move. If this is set greater than 0, Balancer will stop waiting for a block move completion after this time. In typical clusters, a 3 to 5 minute timeout is reasonable. If timeout happens to a large proportion of block moves, this needs to be increased. It could also be that too much work is dispatched and many nodes are constantly exceeding the bandwidth limit as a result. In that case, other balancer parameters might need to be adjusted. It is disabled (0) by default.
|
dfs.balancer.max-no-move-interval
|
60000
|
If this specified amount of time has elapsed and no block has been moved out of a source DataNode, on more effort will be made to move blocks out of this DataNode in the current Balancer iteration.
|
dfs.block.invalidate.limit
|
1000
|
The maximum number of invalidate blocks sent by namenode to a datanode per heartbeat deletion command. This property works with "dfs.namenode.invalidate.work.pct.per.iteration" to throttle block deletions.
|
dfs.block.misreplication.processing.limit
|
10000
|
Maximum number of blocks to process for initializing replication queues.
|
dfs.block.replicator.classname
|
org.apache.hadoop.hdfs.server.blockmanagement.BlockPlacementPolicyDefault
|
Class representing block placement policy for non-striped files. There are four block placement policies currently being supported: BlockPlacementPolicyDefault, BlockPlacementPolicyWithNodeGroup, BlockPlacementPolicyRackFaultTolerant and BlockPlacementPolicyWithUpgradeDomain. BlockPlacementPolicyDefault chooses the desired number of targets for placing block replicas in a default way. BlockPlacementPolicyWithNodeGroup places block replicas on environment with node-group layer. BlockPlacementPolicyRackFaultTolerant places the replicas to more racks. BlockPlacementPolicyWithUpgradeDomain places block replicas that honors upgrade domain policy. The details of placing replicas are documented in the javadoc of the corresponding policy classes. The default policy is BlockPlacementPolicyDefault, and the corresponding class is org.apache.hadoop.hdfs.server.blockmanagement.BlockPlacementPolicyDefault.
|
dfs.blockreport.incremental.intervalMsec
|
0
|
If set to a positive integer, the value in ms to wait between sending incremental block reports from the Datanode to the Namenode.
|
dfs.checksum.type
|
CRC32C
|
Checksum type
|
dfs.client.block.write.locateFollowingBlock.retries
|
5
|
Number of retries to use when finding the next block during HDFS writes.
|
dfs.client.failover.proxy.provider
|
The prefix (plus a required nameservice ID) for the class name of the configured Failover proxy provider for the host. For more detailed information, please consult the "Configuration Details" section of the HDFS High Availability documentation.
| |
dfs.client.failover.random.order
|
false
|
Determines if the failover proxies are picked in random order instead of the configured order. The prefix can be used with an optional nameservice ID (of form dfs.client.failover.random.order[.nameservice]) in case multiple nameservices exist and random order should be enabled for specific nameservices.
|
dfs.client.key.provider.cache.expiry
|
864000000
|
DFS client security key cache expiration in milliseconds.
|
dfs.client.max.block.acquire.failures
|
3
|
Maximum failures allowed when trying to get block information from a specific datanode.
|
dfs.client.read.prefetch.size
|
The number of bytes for the DFSClient will fetch from the Namenode during a read operation. Defaults to 10 * ${dfs.blocksize}.
| |
dfs.client.read.short.circuit.replica.stale.threshold.ms
|
1800000
|
Threshold in milliseconds for read entries during short-circuit local reads.
|
dfs.client.read.shortcircuit.buffer.size
|
1048576
|
Buffer size in bytes for short-circuit local reads.
|
dfs.client.replica.accessor.builder.classes
|
Comma-separated classes for building ReplicaAccessor. If the classes are specified, client will use external BlockReader that uses the ReplicaAccessor built by the builder.
| |
dfs.client.retry.interval-ms.get-last-block-length
|
4000
|
Retry interval in milliseconds to wait between retries in getting block lengths from the datanodes.
|
dfs.client.retry.max.attempts
|
10
|
Max retry attempts for DFSClient talking to namenodes.
|
dfs.client.retry.policy.enabled
|
false
|
If true, turns on DFSClient retry policy.
|
dfs.client.retry.policy.spec
|
10000,6,60000,10
|
Set to pairs of timeouts and retries for DFSClient.
|
dfs.client.retry.times.get-last-block-length
|
3
|
Number of retries for calls to fetchLocatedBlocksAndGetLastBlockLength().
|
dfs.client.retry.window.base
|
3000
|
Base time window in ms for DFSClient retries. For each retry attempt, this value is extended linearly (e.g. 3000 ms for first attempt and first retry, 6000 ms for second retry, 9000 ms for third retry, etc.).
|
dfs.client.socket-timeout
|
60000
|
Default timeout value in milliseconds for all sockets.
|
dfs.client.socketcache.capacity
|
16
|
Socket cache capacity (in entries) for short-circuit reads.
|
dfs.client.socketcache.expiryMsec
|
3000
|
Socket cache expiration for short-circuit reads in msec.
|
dfs.client.test.drop.namenode.response.number
|
0
|
The number of Namenode responses dropped by DFSClient for each RPC call. Used for testing the NN retry cache.
|
dfs.client.hedged.read.threadpool.size
|
0
|
Support 'hedged' reads in DFSClient. To enable this feature, set the parameter to a positive number. The threadpool size is how many threads to dedicate to the running of these 'hedged', concurrent reads in your client.
|
dfs.client.hedged.read.threshold.millis
|
500
|
Configure 'hedged' reads in DFSClient. This is the number of milliseconds to wait before starting up a 'hedged' read.
|
dfs.client.use.legacy.blockreader
|
false
|
If true, use the RemoteBlockReader class for local read short circuit. If false, use the newer RemoteBlockReader2 class.
|
dfs.client.write.byte-array-manager.count-limit
|
2048
|
The maximum number of arrays allowed for each array length.
|
dfs.client.write.byte-array-manager.count-reset-time-period-ms
|
10000
|
The time period in milliseconds that the allocation count for each array length is reset to zero if there is no increment.
|
dfs.client.write.byte-array-manager.count-threshold
|
128
|
The count threshold for each array length so that a manager is created only after the allocation count exceeds the threshold. In other words, the particular array length is not managed until the allocation count exceeds the threshold.
|
dfs.client.write.byte-array-manager.enabled
|
false
|
If true, enables byte array manager used by DFSOutputStream.
|
dfs.client.write.max-packets-in-flight
|
80
|
The maximum number of DFSPackets allowed in flight.
|
dfs.content-summary.limit
|
5000
|
The maximum content summary counts allowed in one locking period. 0 or a negative number means no limit (i.e. no yielding).
|
dfs.content-summary.sleep-microsec
|
500
|
The length of time in microseconds to put the thread to sleep, between reaquiring the locks in content summary computation.
|
dfs.data.transfer.client.tcpnodelay
|
true
|
If true, set TCP_NODELAY to sockets for transferring data from DFS client.
|
dfs.datanode.balance.max.concurrent.moves
|
50
|
Maximum number of threads for Datanode balancer pending moves. This value is reconfigurable via the "dfsadmin -reconfig" command.
|
dfs.datanode.fsdataset.factory
|
The class name for the underlying storage that stores replicas for a Datanode. Defaults to org.apache.hadoop.hdfs.server.datanode.fsdataset.impl.FsDatasetFactory.
| |
dfs.datanode.fsdataset.volume.choosing.policy
|
The class name of the policy for choosing volumes in the list of directories. Defaults to org.apache.hadoop.hdfs.server.datanode.fsdataset.RoundRobinVolumeChoosingPolicy. If you would like to take into account available disk space, set the value to "org.apache.hadoop.hdfs.server.datanode.fsdataset.AvailableSpaceVolumeChoosingPolicy".
| |
dfs.datanode.hostname
|
Optional. The hostname for the Datanode containing this configuration file. Will be different for each machine. Defaults to current hostname.
| |
dfs.datanode.lazywriter.interval.sec
|
60
|
Interval in seconds for Datanodes for lazy persist writes.
|
dfs.datanode.network.counts.cache.max.size
|
2147483647
|
The maximum number of entries the datanode per-host network error count cache may contain.
|
dfs.datanode.oob.timeout-ms
|
1500,0,0,0
|
Timeout value when sending OOB response for each OOB type, which are OOB_RESTART, OOB_RESERVED1, OOB_RESERVED2, and OOB_RESERVED3, respectively. Currently, only OOB_RESTART is used.
|
dfs.datanode.parallel.volumes.load.threads.num
|
Maximum number of threads to use for upgrading data directories. The default value is the number of storage directories in the DataNode.
| |
dfs.datanode.ram.disk.replica.tracker
|
Name of the class implementing the RamDiskReplicaTracker interface. Defaults to org.apache.hadoop.hdfs.server.datanode.fsdataset.impl.RamDiskReplicaLruTracker.
| |
dfs.datanode.restart.replica.expiration
|
50
|
During shutdown for restart, the amount of time in seconds budgeted for datanode restart.
|
dfs.datanode.socket.reuse.keepalive
|
4000
|
The window of time in ms before the DataXceiver closes a socket for a single request. If a second request occurs within that window, the socket can be reused.
|
dfs.datanode.socket.write.timeout
|
480000
|
Timeout in ms for clients socket writes to DataNodes.
|
dfs.datanode.sync.behind.writes.in.background
|
false
|
If set to true, then sync_file_range() system call will occur asynchronously. This property is only valid when the property dfs.datanode.sync.behind.writes is true.
|
dfs.datanode.transferTo.allowed
|
true
|
If false, break block transfers on 32-bit machines greater than or equal to 2GB into smaller chunks.
|
dfs.ha.fencing.methods
|
A list of scripts or Java classes which will be used to fence the Active NameNode during a failover. See the HDFS High Availability documentation for details on automatic HA configuration.
| |
dfs.ha.standby.checkpoints
|
true
|
If true, a NameNode in Standby state periodically takes a checkpoint of the namespace, saves it to its local storage and then upload to the remote NameNode.
|
dfs.ha.zkfc.port
|
8019
|
The port number that the zookeeper failover controller RPC server binds to.
|
dfs.http.port
|
The http port for used for Hftp, HttpFS, and WebHdfs file systems.
| |
dfs.https.port
|
The https port for used for Hsftp and SWebHdfs file systems.
| |
dfs.journalnode.edits.dir
|
/tmp/hadoop/dfs/journalnode/
|
The directory where the journal edit files are stored.
|
dfs.journalnode.kerberos.internal.spnego.principal
|
Kerberos SPNEGO principal name used by the journal node.
| |
dfs.journalnode.kerberos.principal
|
Kerberos principal name for the journal node.
| |
dfs.journalnode.keytab.file
|
Kerberos keytab file for the journal node.
| |
dfs.ls.limit
|
1000
|
Limit the number of files printed by ls. If less or equal to zero, at most DFS_LIST_LIMIT_DEFAULT (= 1000) will be printed.
|
dfs.mover.movedWinWidth
|
5400000
|
The minimum time interval, in milliseconds, that a block can be moved to another location again.
|
dfs.mover.moverThreads
|
1000
|
Configure the balancer's mover thread pool size.
|
dfs.mover.retry.max.attempts
|
10
|
The maximum number of retries before the mover consider the move failed.
|
dfs.mover.max-no-move-interval
|
60000
|
If this specified amount of time has elapsed and no block has been moved out of a source DataNode, on more effort will be made to move blocks out of this DataNode in the current Mover iteration.
|
dfs.namenode.audit.log.async
|
false
|
If true, enables asynchronous audit log.
|
dfs.namenode.audit.log.token.tracking.id
|
false
|
If true, adds a tracking ID for all audit log events.
|
dfs.namenode.available-space-block-placement-policy.balanced-space-preference-fraction
|
0.6
|
Only used when the dfs.block.replicator.classname is set to org.apache.hadoop.hdfs.server.blockmanagement.AvailableSpaceBlockPlacementPolicy. Special value between 0 and 1, noninclusive. Increases chance of placing blocks on Datanodes with less disk space used.
|
dfs.namenode.backup.dnrpc-address
|
Service RPC address for the backup Namenode.
| |
dfs.namenode.delegation.token.always-use
|
false
|
For testing. Setting to true always allows the DT secret manager to be used, even if security is disabled.
|
dfs.namenode.edits.asynclogging
|
true
|
If set to true, enables asynchronous edit logs in the Namenode. If set to false, the Namenode uses the traditional synchronous edit logs.
|
dfs.namenode.edits.dir.minimum
|
1
|
dfs.namenode.edits.dir includes both required directories (specified by dfs.namenode.edits.dir.required) and optional directories. The number of usable optional directories must be greater than or equal to this property. If the number of usable optional directories falls below dfs.namenode.edits.dir.minimum, HDFS will issue an error. This property defaults to 1.
|
dfs.namenode.edits.journal-plugin
|
When FSEditLog is creating JournalManagers from dfs.namenode.edits.dir, and it encounters a URI with a schema different to "file" it loads the name of the implementing class from "dfs.namenode.edits.journal-plugin.[schema]". This class must implement JournalManager and have a constructor which takes (Configuration, URI).
| |
dfs.namenode.file.close.num-committed-allowed
|
0
|
Normally a file can only be closed with all its blocks are committed. When this value is set to a positive integer N, a file can be closed when N blocks are committed and the rest complete.
|
dfs.namenode.inode.attributes.provider.class
|
Name of class to use for delegating HDFS authorization.
| |
dfs.namenode.inode.attributes.provider.bypass.users
|
A list of user principals (in secure cluster) or user names (in insecure cluster) for whom the external attributes provider will be bypassed for all operations. This means file attributes stored in HDFS instead of the external provider will be used for permission checking and be returned when requested.
| |
dfs.namenode.max-num-blocks-to-log
|
1000
|
Puts a limit on the number of blocks printed to the log by the Namenode after a block report.
|
dfs.namenode.max.op.size
|
52428800
|
Maximum opcode size in bytes.
|
dfs.namenode.name.cache.threshold
|
10
|
Frequently accessed files that are accessed more times than this threshold are cached in the FSDirectory nameCache.
|
dfs.namenode.replication.max-streams
|
2
|
Hard limit for the number of highest-priority replication streams.
|
dfs.namenode.replication.max-streams-hard-limit
|
4
|
Hard limit for all replication streams.
|
dfs.namenode.replication.pending.timeout-sec
|
-1
|
Timeout in seconds for block replication. If this value is 0 or less, then it will default to 5 minutes.
|
dfs.namenode.stale.datanode.minimum.interval
|
3
|
Minimum number of missed heartbeats intervals for a datanode to be marked stale by the Namenode. The actual interval is calculated as (dfs.namenode.stale.datanode.minimum.interval * dfs.heartbeat.interval) in seconds. If this value is greater than the property dfs.namenode.stale.datanode.interval, then the calculated value above is used.
|
dfs.namenode.snapshot.capture.openfiles
|
false
|
If true, snapshots taken will have an immutable shared copy of the open files that have valid leases. Even after the open files grow or shrink in size, snapshot will always have the previous point-in-time version of the open files, just like all other closed files. Default is false. Note: The file length captured for open files in snapshot is whats recorded in NameNode at the time of snapshot and it may be shorter than what the client has written till then. In order to capture the latest length, the client can call hflush/hsync with the flag SyncFlag.UPDATE_LENGTH on the open files handles.
|
dfs.namenode.snapshot.skip.capture.accesstime-only-change
|
false
|
If accessTime of a file/directory changed but there is no other modification made to the file/directory, the changed accesstime will not be captured in next snapshot. However, if there is other modification made to the file/directory, the latest access time will be captured together with the modification in next snapshot.
|
dfs.pipeline.ecn
|
false
|
If true, allows ECN (explicit congestion notification) from the Datanode.
|
dfs.qjournal.accept-recovery.timeout.ms
|
120000
|
Quorum timeout in milliseconds during accept phase of recovery/synchronization for a specific segment.
|
dfs.qjournal.finalize-segment.timeout.ms
|
120000
|
Quorum timeout in milliseconds during finalizing for a specific segment.
|
dfs.qjournal.get-journal-state.timeout.ms
|
120000
|
Timeout in milliseconds when calling getJournalState(). JournalNodes.
|
dfs.qjournal.new-epoch.timeout.ms
|
120000
|
Timeout in milliseconds when getting an epoch number for write access to JournalNodes.
|
dfs.qjournal.prepare-recovery.timeout.ms
|
120000
|
Quorum timeout in milliseconds during preparation phase of recovery/synchronization for a specific segment.
|
dfs.qjournal.queued-edits.limit.mb
|
10
|
Queue size in MB for quorum journal edits.
|
dfs.qjournal.select-input-streams.timeout.ms
|
20000
|
Timeout in milliseconds for accepting streams from JournalManagers.
|
dfs.qjournal.start-segment.timeout.ms
|
20000
|
Quorum timeout in milliseconds for starting a log segment.
|
dfs.qjournal.write-txns.timeout.ms
|
20000
|
Write timeout in milliseconds when writing to a quorum of remote journals.
|
dfs.quota.by.storage.type.enabled
|
true
|
If true, enables quotas based on storage type.
|
dfs.secondary.namenode.kerberos.principal
|
Kerberos principal name for the Secondary NameNode.
| |
dfs.secondary.namenode.keytab.file
|
Kerberos keytab file for the Secondary NameNode.
| |
dfs.support.append
|
true
|
Enables append support on the NameNode.
|
dfs.web.authentication.filter
|
org.apache.hadoop.hdfs.web.AuthFilter
|
Authentication filter class used for WebHDFS.
|
dfs.web.authentication.simple.anonymous.allowed
|
If true, allow anonymous user to access WebHDFS. Set to false to disable anonymous authentication.
| |
dfs.web.ugi
|
dfs.web.ugi is deprecated. Use hadoop.http.staticuser.user instead.
| |
dfs.webhdfs.netty.high.watermark
|
65535
|
High watermark configuration to Netty for Datanode WebHdfs.
|
dfs.webhdfs.netty.low.watermark
|
32768
|
Low watermark configuration to Netty for Datanode WebHdfs.
|
dfs.webhdfs.oauth2.access.token.provider
|
Access token provider class for WebHDFS using OAuth2. Defaults to org.apache.hadoop.hdfs.web.oauth2.ConfCredentialBasedAccessTokenProvider.
| |
dfs.webhdfs.oauth2.client.id
|
Client id used to obtain access token with either credential or refresh token.
| |
dfs.webhdfs.oauth2.enabled
|
false
|
If true, enables OAuth2 in WebHDFS
|
dfs.webhdfs.oauth2.refresh.url
|
URL against which to post for obtaining bearer token with either credential or refresh token.
| |
ssl.server.keystore.keypassword
|
Keystore key password for HTTPS SSL configuration
| |
ssl.server.keystore.location
|
Keystore location for HTTPS SSL configuration
| |
ssl.server.keystore.password
|
Keystore password for HTTPS SSL configuration
| |
dfs.balancer.keytab.enabled
|
false
|
Set to true to enable login using a keytab for Kerberized Hadoop.
|
dfs.balancer.address
|
0.0.0.0:0
|
The hostname used for a keytab based Kerberos login. Keytab based login can be enabled with dfs.balancer.keytab.enabled.
|
dfs.balancer.keytab.file
|
The keytab file used by the Balancer to login as its service principal. The principal name is configured with dfs.balancer.kerberos.principal. Keytab based login can be enabled with dfs.balancer.keytab.enabled.
| |
dfs.balancer.kerberos.principal
|
The Balancer principal. This is typically set to balancer/_HOST@REALM.TLD. The Balancer will substitute _HOST with its own fully qualified hostname at startup. The _HOST placeholder allows using the same configuration setting on different servers. Keytab based login can be enabled with dfs.balancer.keytab.enabled.
| |
ssl.server.truststore.location
|
Truststore location for HTTPS SSL configuration
| |
ssl.server.truststore.password
|
Truststore password for HTTPS SSL configuration
| |
dfs.lock.suppress.warning.interval
|
10s
|
Instrumentation reporting long critical sections will suppress consecutive warnings within this interval.
|
dfs.webhdfs.use.ipc.callq
|
true
|
Enables routing of webhdfs calls through rpc call queue
|
httpfs.buffer.size
|
4096
|
The size buffer to be used when creating or opening httpfs filesystem IO stream.
|
dfs.datanode.disk.check.min.gap
|
15m
|
The minimum gap between two successive checks of the same DataNode volume. This setting supports multiple time unit suffixes as described in dfs.heartbeat.interval. If no suffix is specified then milliseconds is assumed.
|
dfs.datanode.disk.check.timeout
|
10m
|
Maximum allowed time for a disk check to complete during DataNode startup. If the check does not complete within this time interval then the disk is declared as failed. This setting supports multiple time unit suffixes as described in dfs.heartbeat.interval. If no suffix is specified then milliseconds is assumed.
|
dfs.use.dfs.network.topology
|
true
|
Enables DFSNetworkTopology to choose nodes for placing replicas.
|
dfs.qjm.operations.timeout
|
60s
|
Common key to set timeout for related operations in QuorumJournalManager. This setting supports multiple time unit suffixes as described in dfs.heartbeat.interval. If no suffix is specified then milliseconds is assumed.
|
dfs.reformat.disabled
|
false
|
Disable reformat of NameNode. If it's value is set to "true" and metadata directories already exist then attempt to format NameNode will throw NameNodeFormatException.
|
Tuesday, 23 April 2019
hdfs-default.xml
Subscribe to:
Post Comments (Atom)
No comments:
Post a Comment